NVIDIA ForceWare WHQL Drivers v280.26 - tech
(hx) 11:21 PM CEST - Aug,09 2011
- Post a comment / read (1)
NVIDIA has just released new WHQL-certified ForceWare drivers (v275.33)
for GeForce 6, 7, 8, 9, 100, 200, 300, 400, and
500-series desktop GPUs as well as ION desktop GPUs. There are
drivers for Windows Vista, Windows 7 -32-bit, Windows Vista 64-bit, Windows 7 64-bit,
Windows XP, and Windows XP 64-bit. The GeForce
280.26 drivers add support for a handful of new 3D Vision projections,
including the Acer X1111, BenQ W710ST, and NEC NP-V300W, as well as
ViewSonic's V3D245 3D Vision monitor. Nvidia also shoehorned over two
dozen 3D Vision game profiles, and updated three others (Crysis 2, Deep
Black, and Super Street Fighter IV: Arcade Edition). In addition to
plenty of love for 3D Vision, Nvidia addressed a bunch of issues, both
for single GPU and multi-GPU users.
Resolved Single GPU Issues
-When installing the driver in Windows safe mode, the driver
installation fails with an "NVIDIA Installer failed" message: The NVIDIA PhysX driver installer is not compatible with Microsoft's policy for safe mode, so the failure occurs when the PhysX driver is installed. To install the NVIDIA graphics driver in safe mode, deselect the PhysX driver from the list of NVIDIA driver components during safe mode installation.
-GeForce 400 Series: "Out of Memory" error messages occur when loading certain saved DirectX 9 games with 3D Vision enabled.
-GeForce 500 series: Crysis 2 – when played using DirectX 9, weapons become semi-transparent.
-GeForce 500 Series: Crysis 2 "Seat of Power" – weapons are not drawn correctly.
-GeForce 500 series: World of Tanks – the game hitches and stutters, especially while moving around the view.
-GeForce GTX 280M: "Could not find compatible graphics hardware" error occurs when installing the notebook driver.
Resolved Multi-GPU Issues
-3D Surround, GeForce 400 series: With three displays
connected and enabled, after connecting a ourth display, if cannot be enabled from the NVIDIA Control Panel.
-3D Surround, GeForce 500/400 series: Two displays from the
Surround group go blank upon enabling extended view on a display connected to the non-Surround group GPU.
-3D Vision: 3-way SLI is slower than 2-way SLI in 3D Vision
mode.
3-Way SLI, GeForce 500 series: Displays connected to the HDMI connection on the second or third GPU cannot be enabled from the NVIDIA Control Panel: To
workaround, enable the displays using the Windows Display Settings page.
-Optimus, Notebook GPUs: With the NVIDIA GPU display set as
the secondary Dualview display, a YouTube HD video in full-screen mode is blank the first time
it is played.
-SLI, GeForce 500 Series: Crysis 2 "Seat of Power" – weapons
are not drawn correctly.
-SLI, GeForce 500 Series: Dirt 3 – the game stutters within
the menu and occasionally during a race.
-SLI, GeForce 200 Series: Crysis 2 – the game flickers when
both PhysX and SLI are enabled.
-SLI, GeForce 200 Series: F.E.A.R. – poor SLI performance.
-SLI, GeForce 400 Series: Dragon Age 2 – shadows glitches
occur.
-SLI, GeForce 400 series: After restart the system, the PhysX
processor setting on the Set SLI and PhysX configuration page switches
from "Auto" to "GPU."
-SLI: Homefront – with SLI is enabled, shadows flicker in the
game.
-SLI: The NVIDIA Control Panel reports that the first GPU is
not installed in a high-performance PCIe slot: This message can be
ignored. It is an obsolete message that no longer applies, and will be
removed in a future driver release.
|
Updated:04:16 PM CEST Sep,22
(new)
